Rent a snowboard and boots set for Mount Elbrus

The complete snowboard set contains a board with bindings and a pair of snowboard boots. A helmet, goggles, wrist or knee protection, gloves and clothing are separate rental lines. Add every required item to the request instead of assuming that it is included in the package name or photograph.

Send the information that changes the setup

Provide height, weight, the measured length of both feet in millimeters, usual shoe size and an honest description of ability. State regular or goofy stance only if it is genuinely known. A first-time rider should say that the lead foot is unknown rather than guess. Mention a wide forefoot, narrow heel, high instep, previous pressure or a personal footbed.

Fit both boots before selecting the board

Try both boots in one proper riding sock. Seat the heel, secure the liner and tighten each outer closure zone progressively. Stand with knees flexed and keep both boots on for several minutes. The heel should remain controlled, the toes should not be painfully compressed and the foot should not become numb. Compare both feet after the liners warm.

Check forward flex and closure zones

Flex both legs repeatedly while keeping the soles flat. A small amount of liner movement is different from the heel lifting freely inside the boot. Identify which lace, dial or strap controls each area and practice loosening it. More force is not a substitute for the correct shape or size.

Board width must suit the actual boots

The external boot footprint affects useful board width and centering in the bindings. Staff should inspect toe and heel overhang with the real pair. Excessive overhang is undesirable, while an unnecessarily wide board may feel slower from edge to edge. Street-shoe size, a photograph or the size label alone cannot establish compatibility.

Length and character are not chosen by height alone

Height gives an initial range, while weight, ability and the construction of the available board affect the final choice. A beginner does not gain control from an excessively long, stiff or demanding board. Exact brand, color and model depend on suitable stock for the dates and are confirmed after fitting.

Prepare a practical stance without guessing

Staff center both boots and prepare a practical starting stance for the rider. If the user has a familiar setup, describe the lead foot and known angles during fitting so they can be checked. Do not copy another person’s stance, rotate highbacks or move binding discs after issue.

Operate every boot and binding closure

Insert both boots and fasten every ratchet yourself, preferably in the gloves you will ride in. Ankle and toe straps should lie over their intended areas, highbacks and baseplates should remain secure and the boots should not move after closure. Practice releasing both bindings without forcing a ratchet.

Inspect every issued component

• check the board base, edges and top surface;
• inspect binding discs, straps, ratchets and highbacks;
• operate every boot lace, dial, inner harness and strap;
• compare both boots and confirm they form a pair;
• record visible damage before leaving;
• match the board and boots to the issue document;
• confirm collection and return dates.

Know what the set does not include

Fit a helmet and goggles together and add them separately. Wrist, knee and elbow protection, gloves and clothing also remain separate unless written into the confirmed request. A related-product block is not a list of included equipment.

Recheck the system after a fall

Stop if a strap or ratchet changes position, a highback becomes loose, a boot closure fails or the board shows new damage. Compare both bindings and boots before continuing. Do not hide damage, change the stance or attempt a temporary repair that could conceal a fault.

Dry and return the complete set

Loosen the boot closures and dry the liners only by the agreed method, away from strong direct heat. Return the board and both boots with every issued part. Availability and the exact set are confirmed only after the request and physical fitting in Terskol.